Dallas Rangemaster Treble Booster Clone built using genuine New Old Stock (NOS) forty year old Mullard OC44 PNP germanium transistor. It boosts the signal of your guitar as you move up the neck, boosting the higher notes allowing solos to cut through. The harder you hit the strings the effect moves from subtle soft clipping to harder overdrive. Each device is individually biaised to provide the authentic Dallas Rangemaster tone.

• The original NOS Mullard OC44 with individually matched carbon film biasing resistors
• Boost from 0db at the bottom E string increasing to 20db at the 12th fret of the top E;
• Handwired using quality components, true bypass footswitch and Blue LED indicator;
• Powered by a 9v PP3 battery (included) - low power consumption;
• Strong, rugged design;
• Blue LED indicator and blue non-slip rubber backing.

Classic Overdrive Pedal with Germanium 1N100A Clipping Diodes, this pedal has been tuned to give a fatter and slightly smoother overdrive than a stock TS9, similar in tone to the Keeley version, but at a fraction of the price.

• Level and Overdrive provding increased gain and tonal shaping;
• New Old Stock (NOS) germanium 'soft' clipping diodes giving a smooth authentic and identifiable rock sound;
• Powered by a 9v PP3 battery (included) or via a standard 9V DC power supply e.g. Boss (available separately);
• Handwired using quality components, true bypass footswitch and LED indicator.

Strong, powerful and  punchy clean boost pedal. This pedal gives a whopping +35 db of clean boost, with active treble and bass controls forr added dynamic range. Also sounds awesome when used to overdrive a valve amp, think Metalica's tone on steroids.

• Volume; Treble and Bass;
• Bass Cut switch for a sharper sound;
• New Old Stock (NOS) HA1457W SIL 8 Pin Opamp;
• 2SK246 JFET giving clean levels of boost from mild to punchy (+25dB);
• High quality construction with true bypass;
• Ideal for bass guitars.

High quality true bypass effects loop.

• True bypass effects loop - add true bypass to your favourite effects;
• Switch between two amplifiers or two guitars;
• Passive circuit - battery included to power the LED indicator;
• Exceptionally low noise, will not affect your tone;
• Works with all set ups, including bass guitars.

True bypass volume cut. This device allows you to preset your guitar's volume and then override it instantly at the push of a button. Set your amplifier up for all out crunch, then wind back the control on boost switch to give either a clean or bluesy tone, and when you're ready hit the switch for instant effect. Alternatively use it in your valve amp's effects send and return loop to get that fully cranked amp sound at lower levels.

High quality true bypass dual effects loop, this pedal has several modes of operation, all with no loss of tone through the pedal:

• Switch Silently Between FX Loop A and FX Loop B;
• Disconnect either FX B Send or Return and the pedal will revert to a single effects loop;
• Plug two guitars in to Dual FX Loop and switch between the two;
• Plug two amps in to the pedal and switch between the two;
• LED indicators (blue and red) for clear channel switching;
• Passive circuit - true bypass and exceptionally low noise.

OC44K equipped Dallas Rangemaster Treble Booster Clone with an OC44K PNP germanium transistor. Similar to our Mullard equipped treble booster using a more modern transistor to give slightly more edge than the Mullard. Each device is individually biaised ensuring our reputation as the sweetest treble booster manufacturer out there!

• Identical to the Mullard equipped Tonemaster using an OC44K germanium transistor insrtead of the ultra rare Mullard;
• Gives slighlty more "bite" than the Mullard version;
• Handbiased using quality components, true bypass footswitch and Blue LED indicator;
• Powered by a 9v PP3 battery (included) with very low power consumption;
• Boost from 0db at the bottom E string increasing to 20db at the 12th fret of the top E.

Mullard AC128 Fuzz Face Clone. This pedal recreates that classic germanium fuzz face/tone bender sound from the sixties and seventies. The transistors have been individually selected and matched for gain and leakage to make each pedal sound consistent and sweet. It has been built from forty year old germanium Mullard AC128 PNP transistors.  Features include:

• Controls - Fuzz and Level;
• Matched New Old Stock (NOS) Mullard AC128s;
• Classic Germanium 60's Fuzz Tone;
• Wired for True Bypass;
• High quality construction.

12AX7 Equipped Valve Overdrive with three modes of operation: classic valve overdrive; clean valve boost and top boost mode. This device is hadwired and features a germanium preamplifier biased to give an authentic bluesy tone that blows away all mainstream valve overdrive pedals. All the sounds in the sound clip below can be dialed in  with just two controls!  

• 12AX7 Valve Booster;
• Germanium transistor preamp
• Classic vintage overdrive sound;
• 3 modes: Top Boost; Overdrive and Clean Valve Boost; 
• Powered by 9V DC Adapter (included),
• Wired for True Bypass.

This pedal recreates that classic germanium fuzz face/tone bender sound from the sixties and seventies. The transistors have been individually selected and matched for gain and leakage to make each pedal sound consistent and sweet. It has been built using AC128 PNP transistors, and is identical to our Boost Switch Vintage Fuzz pedal circuit, but in a more econmical package

• Controls - Fuzz and Level;
• Germanium AC128 PNP transistors;
• Classic Germanium 60's Fuzz Tone;
• Transistors are individually matched for gain and leakage;
• Wired for true bypass.

Dallas Rangemaster Treble Booster Clone with an OC44K PNP germanium transistor. It boosts the signal of your guitar as you move up the neck, boosting the higher notes allowing solos to cut through. The harder you hit the strings the effect moves from subtle soft clipping to harder overdrive. It contains the identical circuit to our Boost Switch Tonemaster OC44K treble booster but in a more economical package. Each device is individually biaised.

• Black glass OC44K with individually matched carbon film biasing resistors;
• Boost from 0db at the low E string increasing to 20db at the 12th fret of the top E;
• ABS Plastic Enclosure, handwired components;
•  true bypass footswitch and Red LED indicator.

Clean Boost pedal with an TL071 8 pin Opamp. A good quality solid clean boost pedal, like the M-133, to balance guitars with different outputs or to use as a general purpose preamplifier.

• Hi gain preamplifier, TL071 8 pin Opamp;
• Boost from 0db to +35dB;
• ABS Plastic Enclosure, handwired components;
• True bypass footswitch and Red LED indicator.

FZ-1A Clone:

Similar to the BSP Audio Vintage Fuzz BC108c for look and feel except the board is changed for one with Germanium Mullard AC128 New Old Stock (NOS) forty year old transistors. Great classic germanium fuzz face sounds in the BSP Audio package and price range.